15C25
Airmix® Paint Pump
The 15C25 Airmix® pump is perfect for painting small quantities of fluid products, water or solvent based. Up to 90 bar of fluid pressure to compensate pressure drops.
Good chemical compatibility with GT or MB-A cartridges.
Large range of "ready to spray" kits
Suction rod or gravity hopper
Description
Technical Data
Equipment
Documents & Media
Technologies
Markets
Performance
♦ Constant delivery and pulse free for superior finish
♦ Priming at very low air pressure (0.6 bar)
Productivity
♦ Large foot valve to handle high viscosity materials up to 5,000 cPs
♦ A closed construction to prevent from risk of injuries & to protect lubricant from external contamination
♦ Quick maintenance thanks to an easy rotable outlet fitting
♦ Facilitate pump priming & flushing thanks to a design made to eliminate dead zone: time saved
♦ Leak monitoring vent hole for fast control
♦ A quiet air motor make very low noise
Sustainability
♦ 45% less part vs competitors for the air motor to provide a better maintenance
♦ Differential air motor to avoid the paint pump from frost
♦ Ultra coated pluger for less friction & improved abrasion resistance
♦ Single GT seal to avoid throat packing maintenance & low friction & offers a large lubricant wet cup
| Designation | Value |
|---|---|
| products_air_consumption_cfm | 1.65 |
| products_air_consumption_m3_h | 2.8 |
| products_air_inlet | F3/8 BSPP |
| products_depth_in | 6.7 |
| products_depth_mm | 170 |
| products_fluid_inlet | F 1/2 BSPP / M26x125 |
| products_fluid_outlet | M1/2'' JIC |
| products_fluid_output_at_20_cycles_mn_gal_min | 0.13 |
| products_fluid_output_at_20_cycles_mn_l_min | 0.5 |
| products_fluid_output_at_60_cycles_mn_gal_min | 0.4 |
| products_fluid_output_at_60_cycles_mn_l_min | 1.5 |
| products_free_flow_rate_gal_min | 0.4 |
| products_free_flow_rate_l_min | 1.5 |
| products_height_in | 22.6 |
| products_height_mm | 575 |
| products_maximum_air_pressure_bar | 6 |
| products_maximum_air_pressure_psi | 87 |
| products_maximum_material_pressure_bar | 90 |
| products_maximum_material_pressure_psi | 1305 |
| products_maximum_temperature_c | 60 |
| products_maximum_temperature_f | 140 |
| products_motor_type | Differential |
| products_number_of_cycles_per_liter_of_products | 40 |
| products_power_source | Pneumatic |
| products_pressure_ratio | 15/1 |
| products_pump_displacement_cc | 25 |
| products_pump_displacement_in3 | 1.52 |
| products_pump_type | Cup pump with balls |
| products_pumping_technology | Cup piston pumps |
| products_sound_level | 71.2 |
| products_weight_kg | 7.7 |
| products_weight_lbs | 17 |
| products_wetted_parts | Hard chrome stainless steel, POM C, Stainless steel 303, Polyethylene |
| products_width_in | 12.6 |
| products_width_mm | 320 |
| Designation | Part number |
|---|---|
| AIRMIX PUMP 15C25 W/M W/O FITLER W/O SUCTION | 151140000 |
| AIRMIX PUMP 15C25 W/M W/O FILTER W/O SUCT ROD INLET F1/2 | 151140320 |
| AIRMIX PUMP 15C25 W/M MBA M26x125 WO FILTER WO ROD | 151140400 |
| AIRMIX PUMP 15C25 W/M MBA F1/2 WO FILTER WO ROD | 151140450 |
| 15C25 PUMP WITH SUCTION ROD | 151140100 |
| 15C25 PUMP WITH SUCTION ROD AND FILTER | 151140150 |
| 15C25 PUMP WITH SUCTION ROD | 151140500 |
| 15C25 PUMP AIRLESS AIR SUPL W/O PRODUCT FILTER | 151140300 |
| 15C25 PUMP WITH SUCTION ROD & FILTER | 151140550 |
| 15C25 PUMP AIRLESS AIR SUPL W/O PRODUCT FILTER | 151140650 |
Documents PDF
-
Kremlin_Airmix-Range-Catalogue-V6-EN_2024.pdf
Documents Instruction Manuals
-
Airmix-pump 15-C25-30-C25-instructions-manual-sames-kremlin-582093110-cn.pdf
-
Bomba 15-C25-30-C25-instrucoes-utilizacao-sames-kremlin-582019110-pt.pdf
-
Bombas 15-C25-30-C25-libro-instrucciones-sames-kremlin-582019110-sp.pdf
-
pump 15-C25-30-C25-instructions-manual-sames-kremlin-582019110-cn.pdf
-
pump 15-C25-30-C25-instructions-manual-sames-kremlin-582093110-cn.pdf
-
pumpa-15-C25-30-C25-instrukcja-obługi-sames-kremlin-582019110-pl.pdf
-
pumpe-15-C25-30-C25-betrieb-und-wartungsanleitung-sames-kremlin-582019110-de.pdf
-
pumps 15-C25-30-C25-instructions-manual-sames-kremlin-582019110-uk.pdf
-
582019110-RU.pdf
-
pompe-15-C25-30-C25-manuale-uso-sames-kremlin-582019110-it.pdf
-
Pompes 15-C25-30-C25-manuel-instruction-sames-kremlin-582019110-fr.pdf
Linked Products
Airmix® Xcite®+
Airmix® technology
Let's get in touch-
What is Airmix®?
Airmix® is a technology, invented in 1975 by Kremlin, combines the advantages of airless spraying and air-assisted spraying to deliver high-quality paint application with improved transfer efficiency and reduced product consumption.
-
What are the benefits of using Airmix®?
Airmix® technology enables the application of thicker paint layers to better protect surfaces, without compromising on finish quality. Its benefits include superior finish quality, high transfer efficiency, lower paint consumption, and fast, uniform application.
-
For which types of projects is Airmix® recommended?
Airmix® technology is ideal for industrial applications where a balance between protective thickness and finish quality is required, such as furniture manufacturing, the transportation industry, and rolling equipment, among others.